- Hasta un 56 % de descuento
ROCKSOLAR
Microinversor de la serie Hoymiles HMS-2000
Precio de ventaDesde $349.99 Precio normal $799.00Precio unitarioDisponibles (510 unidades) ROCKSOLAR
Microinversor AP Systems DS3-NA de 880 W con entrada para módulo fotovoltaico dual
Precio de ventaDesde $206.00 Precio normal $325.00Precio unitarioDisponibles (588 unidades)- Hasta un 58 % de descuento
ROCKSOLAR
Microinversor 2 en 1 Hoymiles serie HMS-1000
Precio de ventaDesde $199.99 Precio normal $399.00Precio unitarioDisponibles (845 unidades) ROCKSOLAR
Microinversor trifásico AP systems QT2 208V 1728W
Precio de venta $395.00 Precio normal $595.00Precio unitarioDisponibles (408 unidades)- Hasta un 45 % de descuento
ROCKSOLAR
Microinversor Hoymiles serie HMS-2000: trifásico 4 en 1 de 208 V
Precio de ventaDesde $439.99 Precio normal $799.00Precio unitarioDisponibles (600 unidades) - Hasta un 54 % de descuento
ROCKSOLAR
Microinversor Hoymiles serie HMS-400: microinversor solar 1 en 1 de alta potencia
Precio de ventaDesde $169.99 Precio normal $366.00Precio unitarioDisponibles (200 unidades) ROCKSOLAR
Enphase IQ8P-3P-72-E-US 475W – Microinversor comercial de alta eficiencia
Precio de venta $195.00 Precio normal $255.00Precio unitarioDisponibles (250 unidades)ROCKSOLAR
Microinversor Enphase IQ8HC-72-M-US de 384 W
Precio de venta $245.00 Precio normal $325.00Precio unitarioDisponibles (500 unidades)ROCKSOLAR
Microinversor Enphase IQ8AC-72-M-US de 366 W
Precio de venta $255.00 Precio normal $325.00Precio unitarioDisponibles (200 unidades)
Common Question
Can a hybrid inverter work without a battery?
Most can run as an ordinary grid-tie inverter with no battery fitted, and have storage added later. You lose outage protection until the battery is installed — that is the whole reason to buy hybrid rather than grid-tie.
How much does a hybrid solar system cost?
Complete systems on this page range from roughly $9,700 to $39,600, depending on inverter size and how much storage you choose. That covers the equipment; installation, permits and racking are additional and vary by site.
Do I need an electrician?
Yes. These systems connect to your main service and involve high DC voltages. Design, installation and inspection must be carried out by a licensed electrician or professional engineer, to the National Electrical Code and any local amendments.
Will it work with my existing solar panels?
Often, if the array voltage and current fit within the hybrid inverter's limits. Send us your panel model and how they are wired, and we will check it before you order.