Catalogue · 6 products

Micro Inverter

Microinverters convert each panel's DC to grid AC on the roof, one per panel or per pair, so there is no high-voltage DC string, rapid shutdown is built in, and one shaded panel affects only itself. They suit small and mid-size grid-tie arrays, complicated roofs and installs you want to grow a few panels at a time.

Read moreRead less

Enphase IQ8 units (325 W to 475 W per panel) are the widest-supported single-panel option. Hoymiles HMS-400, HMS-1000 and HMS-2000 take one, two or four panels each, with the HMT-2000 for 208 V three-phase. APsystems DS3 takes two panels at 880 W, and the QT2 handles four on three-phase. Match the microinverter's input range to your panel's wattage and voltage.

Microinverters need a gateway or monitoring bridge from the same maker to report data, and the array also needs the maker's AC trunk cable and an AC disconnect; ask us for the parts list for your panel count.

View as

Common questions

Before you order.

If yours isn't here, ask an engineer. It costs nothing and it's the step most people skip.

What if I'm not sure this is the right product?

Ask before you order. Send us what you need to run, or your pool or well figures, and an engineer will confirm the choice — it costs nothing. Or use the finder below, which sizes from what you actually run and shows its reasoning.

Compare /3

Loading...