{"title":"Solar Kit Accessories","description":"\u003cp\u003eThe parts that finish an off-grid or RV solar installation: PV cable pairs and branch connectors to join panels, Z-brackets to mount them, LiFePO4 chargers for 12 V and 48 V banks, and the wired remote panel for ROCKSOLAR inverters.\u003c\/p\u003e\n\u003cp\u003eBranch connectors put two, three or four panels in parallel at the array; PV cable pairs bring the array to the controller; the Z-bracket set mounts a rigid panel on an RV or shed roof. The 14.6 V chargers charge a 12 V LiFePO4 from shore power, and the 58.4 V charger does the same for a 48 V bank.\u003c\/p\u003e\n\u003cp\u003eCable gauge and fuse size depend on the run length and current; every listing states its rating, and we will check it against your system if you send the inverter and battery models.\u003c\/p\u003e","products":[{"product_id":"rocksolar-pv-cables-with-mc4-connectors-one-pair-red-black-for-off-grid-solar-systems","title":"ROCKSOLAR PV Cables One Pair Red+Black for Off Grid Solar Systems","description":"\u003cp\u003e\u003cstrong\u003eROCKSOLAR PV Cables with MC4 Connectors, red and black pair\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA matched pair of solar extension cables, one red and one black, with an MC4 male on one end and an MC4 female on the other, to carry an array's output from the roof or the ground rack to the charge controller. Choose the gauge for the current and the run, and the length from 10 ft to 500 ft.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich gauge:\u003c\/strong\u003e 10 AWG is the standard for one panel or one string up to about 30 A over runs to 50 ft. 8 AWG carries the same current over a longer run, or a parallel pair of panels, with less voltage drop. 4 AWG and 1 AWG are for the heavy DC side of a system, between a battery bank and an inverter or a large controller, where the current runs to 100 A and more; those two sizes are stocked in 10 ft, and longer lengths are made to order.\u003c\/p\u003e\u003cp\u003eKeep voltage drop under 3 percent: work it out from the run length and current, or \u003ca href=\"\/pages\/contact-us\"\u003eask us\u003c\/a\u003e with your panel count and the distance. The cables are UV-resistant and rated for outdoor use, and the MC4 ends mate with any standard MC4 panel lead, branch connector or combiner. Wiring is for reference; on a permanent installation a licensed electrician should make the connections.\u003c\/p\u003e","brand":"ROCKSOLAR","offers":[{"title":"1 AWG \/ 10Ft","offer_id":46783974703363,"sku":null,"price":499.99,"currency_code":"USD","in_stock":true},{"title":"1 AWG \/ 20Ft","offer_id":46783974736131,"sku":null,"price":899.99,"currency_code":"USD","in_stock":false},{"title":"1 AWG \/ 40Ft","offer_id":46783974768899,"sku":null,"price":1649.99,"currency_code":"USD","in_stock":false},{"title":"1 AWG \/ 100Ft","offer_id":46783974801667,"sku":null,"price":2999.99,"currency_code":"USD","in_stock":false},{"title":"1 AWG \/ 200Ft","offer_id":46783974834435,"sku":null,"price":4999.99,"currency_code":"USD","in_stock":false},{"title":"1 AWG \/ 300Ft","offer_id":46783974867203,"sku":null,"price":6499.99,"currency_code":"USD","in_stock":false},{"title":"4 AWG \/ 10Ft","offer_id":46783974932739,"sku":null,"price":249.99,"currency_code":"USD","in_stock":true},{"title":"4 AWG \/ 20Ft","offer_id":46783974965507,"sku":null,"price":449.99,"currency_code":"USD","in_stock":false},{"title":"4 AWG \/ 40Ft","offer_id":46783974998275,"sku":null,"price":824.99,"currency_code":"USD","in_stock":false},{"title":"4 AWG \/ 100Ft","offer_id":46783975031043,"sku":null,"price":1499.99,"currency_code":"USD","in_stock":false},{"title":"4 AWG \/ 200Ft","offer_id":46783975063811,"sku":null,"price":2499.99,"currency_code":"USD","in_stock":false},{"title":"4 AWG \/ 300Ft","offer_id":46783975096579,"sku":null,"price":3249.99,"currency_code":"USD","in_stock":false},{"title":"8 AWG \/ 10Ft","offer_id":44445281124611,"sku":"","price":99.99,"currency_code":"USD","in_stock":true},{"title":"8 AWG \/ 20Ft","offer_id":44445281157379,"sku":"","price":179.99,"currency_code":"USD","in_stock":true},{"title":"8 AWG \/ 40Ft","offer_id":44445281288451,"sku":"","price":329.99,"currency_code":"USD","in_stock":true},{"title":"8 AWG \/ 100Ft","offer_id":46783975162115,"sku":null,"price":599.99,"currency_code":"USD","in_stock":true},{"title":"8 AWG \/ 200Ft","offer_id":46783975194883,"sku":null,"price":999.99,"currency_code":"USD","in_stock":true},{"title":"8 AWG \/ 300Ft","offer_id":46783975227651,"sku":null,"price":1299.99,"currency_code":"USD","in_stock":true},{"title":"10 AWG \/ 10Ft","offer_id":44445310550275,"sku":"PVC10AWG10","price":49.99,"currency_code":"USD","in_stock":true},{"title":"10 AWG \/ 20Ft","offer_id":43853139050755,"sku":"RSACC-20f10-MC4P-001","price":89.99,"currency_code":"USD","in_stock":true},{"title":"10 AWG \/ 40Ft","offer_id":44445281255683,"sku":"","price":159.99,"currency_code":"USD","in_stock":true},{"title":"10 AWG \/ 100Ft","offer_id":46783975293187,"sku":"","price":259.99,"currency_code":"USD","in_stock":true},{"title":"10 AWG \/ 200Ft","offer_id":46783975325955,"sku":"","price":399.99,"currency_code":"USD","in_stock":true},{"title":"10 AWG \/ 300Ft","offer_id":46783975358723,"sku":"","price":549.99,"currency_code":"USD","in_stock":true},{"title":"10 AWG \/ 500Ft","offer_id":47109333451011,"sku":null,"price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/products\/optimize-solar-setup-with-solar-extension-cable-rocksolar-ca.jpg?v=1687183870"},{"product_id":"rocksolar-y-branch-connectors-for-solar-panels-mmf-ffm-pair","title":"ROCKSOLAR 2 to 1 Solar Branch Connectors MMF+FFM Pair","description":"\u003cp\u003e\u003cstrong\u003eROCKSOLAR 2-to-1 Solar Branch Connectors, MMF + FFM pair\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pair of MC4 Y-connectors that joins two solar panels in parallel into one positive and one negative lead. Sealed to IP67 with a UV-resistant housing, they live on the roof or the rack for the life of the array.\u003c\/p\u003e\u003cp\u003ePanels wired in parallel keep the array at one panel's voltage and add the currents together, which is the right layout for a PWM controller, a 12 V or 24 V battery bank, or any MPPT whose open-circuit limit rules out a series string. Use one pair per array: the MMF side joins the positives and the FFM side the negatives, so the two output leads plug straight into the controller's PV input or an extension cable. Only parallel panels of the same voltage, and fuse each panel if more than two are combined; the output carries the sum of the panel currents, so size the downstream cable for that.\u003c\/p\u003e\u003cp\u003eFor three or four panels use the \u003ca href=\"\/products\/rocksolar-3-to-1-solar-branch-connectors-mmmf-fffm-pair\"\u003e3-to-1\u003c\/a\u003e or \u003ca href=\"\/products\/rocksolar-4-to-1-solar-branch-connectors-mmmmf-ffffm-pair\"\u003e4-to-1\u003c\/a\u003e pair. Wiring is for reference; on a permanent installation a licensed electrician should make the connections.\u003c\/p\u003e","brand":"ROCKSOLAR","offers":[{"title":"Default Title","offer_id":43853139247363,"sku":"RSACC-0021-YBRN-001","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/products\/Rocksolar2to1SolarBranchConnectorsMMMF_FFFMPair_f53cf7ab-d7ef-4abe-8386-e1b5131d0a43.png?v=1687183877"},{"product_id":"rocksolar-14-6v-20a-292w-lifepo4-battery-charger","title":"ROCKSOLAR 14.6V\/20A 292W LiFePO4 Battery Charger","description":"\u003cp\u003e\u003cstrong\u003eROCKSOLAR 14.6 V \/ 20 A 292 W LiFePO4 Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 20 A charger for any 12 V LiFePO4 battery, from a 10 Ah trolling or camera battery to a 100 Ah or 200 Ah house battery. It runs from 100 to 240 V AC and puts out 14.6 V at up to 20 A (292 W): a flat 100 Ah battery is full in about 5 to 6 hours and a 200 Ah in 10 to 12, which makes it the right charger for a house battery on shore power or a generator. Small batteries under 20 Ah are better on the \u003ca href=\"\/products\/rocksolar-14-6v-10a-lifepo4-battery-charger\"\u003e10 A charger\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThe charger runs a lithium profile (constant current, then constant voltage at 14.6 V, then off), which a lead-acid or SLA charger cannot do: those either stop short of full or hold a float voltage that LiFePO4 does not want. If a battery has switched itself off on low voltage, the charger's BMS-restart function wakes it and charges it normally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the box:\u003c\/strong\u003e the charger with an AC cord, an AC-DC adapter and a male DC plug, which takes a ring-terminal or alligator-clip battery lead, so it connects to a bare battery or to one installed in a boat or RV. LEDs show power on, charging and full. Rated for 12 V LiFePO4 batteries only; do not use it on lead-acid or on a 24 V bank.\u003c\/p\u003e","brand":"ROCKSOLAR","offers":[{"title":"Default Title","offer_id":43853146816771,"sku":"ADAPTOR-RS328","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/products\/fast-and-reliable-20a-lifepo4-battery-charger-rocksolar_4.jpg?v=1687184330"},{"product_id":"replacement-19v1-5a-power-adapter-for-your-weekender-rs81-portable-power-station","title":"Replacement 19V1.5A Power Adapter for your Weekender (RS81) Portable Power Station","description":"\u003cp\u003e\u003cstrong\u003eReplacement 19 V \/ 1.5 A AC Adapter for the Weekender (RS81) Portable Power Station\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe wall charger for the ROCKSOLAR Weekender (RS81) power station: it plugs into any 100 to 240 V outlet and delivers 19 V \/ 1.5 A (28.5 W) to the station's DC input. Buy it if the original is lost or damaged, or to keep a second one at the cabin, in the truck or at the office so the station is always charging somewhere.\u003c\/p\u003e\u003cp\u003eAt 28.5 W it refills the 88 Wh Weekender from empty in about 4 hours. Use only the adapter rated for your station; a different voltage can damage the charging circuit. 1-year warranty.\u003c\/p\u003e","brand":"ROCKSOLAR","offers":[{"title":"Default Title","offer_id":43853147898115,"sku":"ADAPTOR-RS81","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/products\/portable-power-adapter-for-weekender-power-station-rocksolar-ca_2.jpg?v=1687184498"},{"product_id":"rocksolar-inverter-wired-remote-control-panel","title":"Rocksolar Inverter Wired Remote Control Panel","description":"\u003cp\u003e\u003cstrong\u003eROCKSOLAR Inverter Wired Remote Control Panel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA wired remote for the ROCKSOLAR 1000 W, 2000 W and 3000 W pure sine wave inverters, so you can switch the inverter on and off and read its input and output from inside the RV, the cabin or the boat while the inverter stays next to the battery. It connects with a 6-pin telephone-style cable and works up to 7 m (23 ft) from the inverter.\u003c\/p\u003e\u003cp\u003eThe 156 × 87 mm panel has a backlit LCD and two keys: the main button turns the inverter on or off, and the display cycles through battery voltage, output voltage and load. Faults show as warning codes, so an over-temperature, overload or low-battery shutdown is identified without going to the inverter. Mounts flush in a cabinet wall or on the surface.\u003c\/p\u003e\u003cp\u003eCompatible with ROCKSOLAR inverters that have the remote port; it does not work with other brands. 1-year warranty.\u003c\/p\u003e","brand":"ROCKSOLAR","offers":[{"title":"Default Title","offer_id":44020789117187,"sku":"RSACC-0000-IRC-001","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/files\/REMOTE5.png?v=1694104862"},{"product_id":"rocksolar-4-to-1-solar-branch-connectors-mmmmf-ffffm-pair","title":"Rocksolar 4 to 1 Solar Branch Connectors MMMMF+FFFFM Pair","description":"\u003cp\u003e\u003cstrong\u003eROCKSOLAR 4-to-1 Solar Branch Connectors, MMMMF + FFFFM pair\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pair of MC4 branch connectors that joins four solar panels in parallel into one positive and one negative lead: four 100 W to 200 W panels on an RV or cabin roof feeding one charge controller. IP67 sealed, UV-resistant, snap-lock.\u003c\/p\u003e\u003cp\u003ePanels wired in parallel keep the array at one panel's voltage and add the currents together, which is the right layout for a PWM controller, a 12 V or 24 V battery bank, or any MPPT whose open-circuit limit rules out a series string. Use one pair per array: the MMMMF side joins the positives and the FFFFM side the negatives, so the two output leads plug straight into the controller's PV input or an extension cable. Only parallel panels of the same voltage, and fuse each panel if more than two are combined; the output carries the sum of the panel currents, so size the downstream cable for that.\u003c\/p\u003e\u003cp\u003eFour panels in parallel can push 40 A or more through the output, so check the controller's rating and use 8 AWG or heavier cable on the combined run. Wiring is for reference; on a permanent installation a licensed electrician should make the connections.\u003c\/p\u003e","brand":"ROCKSOLAR","offers":[{"title":"Default Title","offer_id":44020789444867,"sku":"RSACC-0041-YBRN-001","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/products\/1to4SolarCable.png?v=1687183077"},{"product_id":"rocksolar-3-to-1-solar-branch-connectors-mmmf-fffm-pair","title":"Rocksolar 3 to 1 Solar Branch Connectors MMMF+FFFM Pair","description":"\u003cp\u003e\u003cstrong\u003eROCKSOLAR 3-to-1 Solar Branch Connectors, MMMF + FFFM pair\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA pair of MC4 branch connectors that joins three solar panels in parallel into one positive and one negative lead, so a three-panel roof or ground array reaches the charge controller on a single pair of cables. IP67 sealed, UV-resistant, snap-lock.\u003c\/p\u003e\u003cp\u003ePanels wired in parallel keep the array at one panel's voltage and add the currents together, which is the right layout for a PWM controller, a 12 V or 24 V battery bank, or any MPPT whose open-circuit limit rules out a series string. Use one pair per array: the MMMF side joins the positives and the FFFM side the negatives, so the two output leads plug straight into the controller's PV input or an extension cable. Only parallel panels of the same voltage, and fuse each panel if more than two are combined; the output carries the sum of the panel currents, so size the downstream cable for that.\u003c\/p\u003e\u003cp\u003eWiring is for reference; on a permanent installation a licensed electrician should make the connections.\u003c\/p\u003e","brand":"ROCKSOLAR","offers":[{"title":"Default Title","offer_id":44020789510403,"sku":"RSACC-0031-YBRN-001","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/products\/3to1SolarBranchConnectorsMMMF_FFFMPair3.jpg?v=1687183083"},{"product_id":"rocksolar-z-bracket-mount-system-for-solar-panels","title":"ROCKSOLAR Z-Bracket Mount System for Solar Panels - (Set of 4)","description":"\u003cp\u003e\u003cstrong\u003eROCKSOLAR Z-Bracket Mount, set of 4\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFour Z-shaped brackets with the bolts, nuts and washers to fix one rigid solar panel flat to a surface: an RV or van roof, a shed or garage roof, a boat hardtop or a home-made wooden frame. One set holds one panel; order a set per panel.\u003c\/p\u003e\u003cp\u003eThe bracket bolts through the panel's frame at the top and screws or bolts to the roof at the bottom, leaving about an inch of air gap under the panel for cooling. Seal every roof penetration with a lap sealant or butyl tape, and land the screws in a rafter or a solid roof member, not in sheet metal alone. Z-brackets fix a panel flat with no tilt; if you want the panel angled, look at a tilt mount instead.\u003c\/p\u003e\u003cp\u003eThis is a fixing kit for single panels, not a racking system: there are no rails and no span, so it is not a substitute for the rail-and-clamp racking on a house roof. Mounting is for reference; on a permanent installation a licensed electrician should confirm the fixings.\u003c\/p\u003e","brand":"ROCKSOLAR","offers":[{"title":"Default Title","offer_id":44020797997315,"sku":"RSACC-0000-ZBRK-001","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/products\/easy-solar-installation-with-z-bracket-mounting-rocksolar.jpg?v=1687183879"},{"product_id":"rocksolar-14-6v-10a-lifepo4-battery-charger","title":"ROCKSOLAR 14.6V\/10A LiFePO4 Battery Charger","description":"\u003cp\u003e\u003cstrong\u003eROCKSOLAR 14.6 V \/ 10 A LiFePO4 Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 10 A charger for any 12 V LiFePO4 battery, from a 10 Ah trolling or camera battery to a 100 Ah or 200 Ah house battery. It runs from 100 to 240 V AC and puts out 14.6 V at up to 10 A (146 W): a flat 50 Ah battery is full in about 5 to 6 hours and a 100 Ah in 10 to 12. For a 100 Ah or larger battery you charge often, the \u003ca href=\"\/products\/rocksolar-14-6v-20a-lifepo4-battery-charger\"\u003e20 A charger\u003c\/a\u003e halves that.\u003c\/p\u003e\u003cp\u003eThe charger runs a lithium profile (constant current, then constant voltage at 14.6 V, then off), which a lead-acid or SLA charger cannot do: those either stop short of full or hold a float voltage that LiFePO4 does not want. If a battery has switched itself off on low voltage, the charger's BMS-restart function wakes it and charges it normally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the box:\u003c\/strong\u003e the charger with an AC cord, an AC-DC adapter and a male DC plug, which takes a ring-terminal or alligator-clip battery lead, so it connects to a bare battery or to one installed in a boat or RV. LEDs show power on, charging and full. Rated for 12 V LiFePO4 batteries only; do not use it on lead-acid or on a 24 V bank.\u003c\/p\u003e","brand":"ROCKSOLAR","offers":[{"title":"Default Title","offer_id":44798904369411,"sku":"RSLFP-CH10-0146-001","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/files\/charger10_fe71c703-8dc5-46b1-a4fc-0622038bb5e4.webp?v=1709726681"},{"product_id":"rocksolar-14-6v-20a-lifepo4-battery-charger","title":"ROCKSOLAR 14.6V\/20A LiFePO4 Battery Charger","description":"\u003cp\u003e\u003cstrong\u003eROCKSOLAR 14.6 V \/ 20 A LiFePO4 Battery Charger\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA 20 A charger for any 12 V LiFePO4 battery, from a 10 Ah trolling or camera battery to a 100 Ah or 200 Ah house battery. It runs from 100 to 240 V AC and puts out 14.6 V at up to 20 A (292 W): a flat 100 Ah battery is full in about 5 to 6 hours and a 200 Ah in 10 to 12, which makes it the right charger for a house battery on shore power or a generator. Small batteries under 20 Ah are better on the \u003ca href=\"\/products\/rocksolar-14-6v-10a-lifepo4-battery-charger\"\u003e10 A charger\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eThe charger runs a lithium profile (constant current, then constant voltage at 14.6 V, then off), which a lead-acid or SLA charger cannot do: those either stop short of full or hold a float voltage that LiFePO4 does not want. If a battery has switched itself off on low voltage, the charger's BMS-restart function wakes it and charges it normally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the box:\u003c\/strong\u003e the charger with an AC cord, an AC-DC adapter and a male DC plug, which takes a ring-terminal or alligator-clip battery lead, so it connects to a bare battery or to one installed in a boat or RV. LEDs show power on, charging and full. Rated for 12 V LiFePO4 batteries only; do not use it on lead-acid or on a 24 V bank.\u003c\/p\u003e","brand":"ROCKSOLAR","offers":[{"title":"Default Title","offer_id":44799497076995,"sku":"RSLFP-CH20-0146-001","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/files\/charger10_8f8090cd-e42e-46cd-8c50-2f6611945324.webp?v=1709726765"},{"product_id":"58-4v-10a-lifepo4-battery-charger","title":"ROCKSOLAR 58.4V\/10A 48V LiFePO4 Battery Charger","description":"\u003cp\u003e\u003cstrong\u003eHigh-Efficiency Charging Solution:\u003c\/strong\u003e Presenting the ROCKSOLAR 58.4V\/10A LiFePO4 Battery Charger, a highly efficient charging device with a robust 584W output power. Ideal for charging 48V LiFePO4 batteries, this charger is a staple for efficient energy management.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Input and Output Range:\u003c\/strong\u003e With a rated input voltage of 100~240Vac and an output voltage of 58.4Vdc, this charger caters to a wide range of power requirements. Its 10A output current ensures rapid and consistent charging, backed by a stable voltage accuracy of ±0.2V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdaptable to Various Environments:\u003c\/strong\u003e Engineered to operate within a broad temperature range of -10 to +45°C, and capable of storage in temperatures from -40 to 70°C. It also functions effectively in relative humidity levels of 5% to 95%, non-condensing, and at altitudes up to 2000m, making it highly adaptable to different environmental conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEfficient Cooling Mechanism:\u003c\/strong\u003e The charger is equipped with a 40x40x20mm bearing fan cooling system, ensuring optimal performance and longevity even under full load conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdvanced Electrical Features:\u003c\/strong\u003e It boasts an input voltage range of 90~264 Vac, a maximum input current of 8A, and a power factor correction of ≥0.95. The charger's output efficiency of ≥89%, coupled with its low ripple \u0026amp; noise levels of ≤500 mVp-p, guarantees a smooth and reliable charging process.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComprehensive Protection Systems:\u003c\/strong\u003e This charger is designed with multiple safety features including reverse polarity protection, output short circuit protection, output overvoltage, and overcurrent protection, ensuring the safety of both the charger and the batteries it powers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntuitive Charging Indicators:\u003c\/strong\u003e The charger provides clear status indicators with a green light for power on, a blue light during charging, and a green light when the battery is fully charged. An additional red light indicates any abnormal conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTrusted Charging Companion:\u003c\/strong\u003e The ROCKSOLAR 58.4V\/10A LiFePO4 Battery Charger is your go-to solution for reliable, efficient, and safe power management, suitable for a wide range of applications.\u003c\/p\u003e","brand":"ROCKSOLAR","offers":[{"title":"Default Title","offer_id":46219967332611,"sku":"RSLFP-CH10-0584-001","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/files\/charger10_8f8090cd-e42e-46cd-8c50-2f6611945324.webp?v=1709726765"},{"product_id":"float-switch-water-level-controller","title":"Float Switch Water Level Controller","description":"\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated Current\/Voltage: AC 10(8A) 250V ~ 10(4A) 380V\u003c\/li\u003e\n\u003cli\u003eRecommended Voltage: DC 24V\u003c\/li\u003e\n\u003cli\u003eWorking Temperature Range: 0°C to 60°C\u003c\/li\u003e\n\u003cli\u003eControl Range: 0.2 meters\u003c\/li\u003e\n\u003cli\u003eElectrical Endurance: 50,000 operations\u003c\/li\u003e\n\u003cli\u003eContact Type: NO (Normally Open) + NC (Normally Closed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShape: Round\u003c\/li\u003e\n\u003cli\u003eCable Length: 4 meters \/ 13.1 feet\u003c\/li\u003e\n\u003cli\u003eBody Dimensions: 10 x 8 x 4.5 cm (3.9\" x 3.1\" x 1.8\") (L x W x T)\u003c\/li\u003e\n\u003cli\u003eNet Weight: 742 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Float Switch Water Level Controller\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ROCKSOLAR","offers":[{"title":"Default Title","offer_id":46741375713539,"sku":"","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/files\/Rocksolar-FloatSwitch1.jpg?v=1744381400"},{"product_id":"4-string-waterproof-solar-combiner-box-with-lightning-arrester-15a-rated-current-fuse-63a-circuit-breaker","title":"4 String Waterproof Solar Combiner Box With Lightning Arrester, 15A Rated Current Fuse \u0026 63A Circuit Breaker","description":"\u003cul\u003e\n\u003cli\u003e\nMaterial: 4 string pv combiner box is made of strong and thick metal, which is durable and long-lasting compared to plastic boxes, and more suitable for outdoor installation. IP65 waterproof rating can effectively prevent bad weather and ensure the product can be well protected\n\u003c\/li\u003e\n\u003cli\u003e\nEasy to Install: The pv box comes with pre-wired cables and ground wire, plug and play, and mounting clips to quickly secure the box to any regular surface, which can save a lot of time\n\u003c\/li\u003e\n\u003cli\u003e\nWidely Used: Suitable for all kinds of pv grid-connected and off-grid power generation systems, compatible with any brand of solar panels and solar connectors\n\u003c\/li\u003e\n\u003cli\u003e\nProducts Include: Plastic solar combiner box, mounting clips, screws, a lock. If you have any questions about the products, you can contact us directly and we will give you a satisfactory answer as soon as possible\n\u003c\/li\u003e\n\u003cli\u003e\nSafety Protection: The solar combiner box is equipped with 63 A circuit breaker and 15 A independent fuse to protect the circuit from short circuit, no voltage and over current, and also equipped with high voltage lightning arrester to avoid damage to the solar panel and inverter when a fault occurs \n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ROCKSOLAR","offers":[{"title":"Default Title","offer_id":46883713089795,"sku":"","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/files\/71bWdz.jpg?v=1748617646"},{"product_id":"2-string-water-proff-pv-combiner-box-with-40a-1000v-circuit-breaker","title":"2 String Waterproof PV Combiner Box with 40A 1000V Circuit Breaker","description":"\u003cul\u003e\n\u003cli\u003e\nPA66 MATERIAL: Made of premium Pa66 material, this solar combiner box is strong and sturdy, impact resistant and wear resistant, safe for long-term use.\n\u003c\/li\u003e\n\u003cli\u003e\nAPPLICABLE SCENARIOS: This combiner box is suitable for photovoltaic solar panel grid connected systems and solar off grid systems, solar power generation systems, etc.\n\u003c\/li\u003e\n\u003cli\u003e\nAPPLICABLE CABLE: Compatible with 5 to 10mm diameter cable, and 10 AWG cable, with a large space for wiring.\n\u003c\/li\u003e\n\u003cli\u003e\nIDEAL REPLACEMENT: A replacement for old or damaged parts, with fine workmanship and attention to detail, that helps improve efficiency.\n\u003c\/li\u003e\n\u003cli\u003e\nEASY TO USE: IP65 waterproof and easy to install, and the transparent cover plate of the combiner box is also convenient for checking the status of the circuit breaker. \n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ROCKSOLAR","offers":[{"title":"Default Title","offer_id":46883715088643,"sku":"","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/files\/61rEaiHOcFL._SX522_6a8647fc-e590-45eb-8809-a1c5d89398ac.jpg?v=1748617741"},{"product_id":"midnite-solar-mnbabybox-baby-box-enclosure-dc-breaker-box","title":"MidNite Solar - MNBABYBOX Baby Box Enclosure DC breaker box","description":"\u003cul\u003e\n\u003cli\u003eDescription\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWarranty\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003cli\u003eReviews\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe original Baby box has been a huge success in filling an industry need. We have created an enclosure called the Big Baby to over come the Baby Box smallness allowing for a ETL listed 4 position din rail box. This box is about twice as wide as the baby box giving you more wiring room. It also includes a ground box lug and mounting provisions for our short insulated bus bar as well as a ground bus bar. A dimensioned drawing is under documents on our website. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnvironmental Rating - Type 1 (Indoor)\u003c\/li\u003e\n\u003cli\u003eBig Baby's DIN rail accepts up to 4 breakers (not included)\u003c\/li\u003e\n\u003cli\u003eQuad accepts up to 4 panel mount breakers (not included)\u003c\/li\u003e\n\u003cli\u003eBreakers: 1-63A\u003c\/li\u003e\n\u003cli\u003eMax. Wire - breakers 6 AWG\u003c\/li\u003e\n\u003cli\u003eMax. AC Voltage - 277VAC\u003c\/li\u003e\n\u003cli\u003eMax. DC Voltage - 300VDC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eListed by ETL for US \u0026amp; Canada\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWarranty - 5 yrs\u003c\/p\u003e","brand":"MidNite Solar","offers":[{"title":"Default Title","offer_id":46883828891907,"sku":"","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/files\/babybox_web.jpg?v=1748621274"},{"product_id":"midnite-solar-mnbigbaby-dc-breaker-box","title":"MidNite Solar - MNBIGBABY DC Breaker Box","description":"\u003cul\u003e\n\u003cli\u003eDescription\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions\u003c\/li\u003e\n\u003cli\u003eSpecifications\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003cli\u003eReviews\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe original Baby box has been a huge success in filling an industry need. We have created an enclosure called the Big Baby to over come the Baby Box smallness allowing for a ETL listed 4 position din rail box. This box is about twice as wide as the baby box giving you more wiring room. It also includes a ground box lug and mounting provisions for our short insulated bus bar as well as a ground bus bar. A dimensioned drawing is under documents on our website. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnvironmental Rating - Type 1 (Indoor)\u003c\/li\u003e\n\u003cli\u003eBig Baby's DIN rail accepts up to 4 breakers (not included)\u003c\/li\u003e\n\u003cli\u003eQuad accepts up to 4 panel mount breakers (not included)\u003c\/li\u003e\n\u003cli\u003eBreakers: 1-63A\u003c\/li\u003e\n\u003cli\u003eMax. Wire - breakers 6 AWG\u003c\/li\u003e\n\u003cli\u003eMax. AC Voltage - 277VAC\u003c\/li\u003e\n\u003cli\u003eMax. DC Voltage - 300VDC\u003c\/li\u003e\n\u003cli\u003eWarranty - 5 yrs.\u003c\/li\u003e\n\u003cli\u003eListed by ETL for US \u0026amp; Canada\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul\u003e\n\u003cli\u003eWeight:    1.50 LBS\u003c\/li\u003e\n\u003cli\u003eWidth:    14.00 (cm)\u003c\/li\u003e\n\u003cli\u003eHeight:    9.00 (cm)\u003c\/li\u003e\n\u003cli\u003eDepth:    23.00 (cm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MidNite Solar","offers":[{"title":"Default Title","offer_id":46883831185667,"sku":"","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/files\/MidNite_Solar_MNBIGBABY.jpg?v=1748621345"},{"product_id":"2-string-water-proof-pv-combiner-box-with-32a-500v-circuit-breaker-and-surge-protector","title":"1 String Waterproof PV Combiner Box with 32A 500V Circuit Breaker and Surge Protector","description":"\u003cp\u003eA DC combiner box for the run between a solar array and a single-MPPT inverter or charge controller, with the three protections that run wants in one IP65 enclosure: a DC fuse, a Type 2 surge protector and a two-pole DC breaker for isolation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum input 500 V DC, one PV string in and one output out — for inverters and controllers with a single MPPT whose string voltage stays under 500 V\u003c\/li\u003e\n\u003cli\u003e32 A two-pole DC circuit breaker (MCB) — isolation and overcurrent protection on the output\u003c\/li\u003e\n\u003cli\u003e10×38 gPV fuse, 32 A, 1000 V DC, in a fuse holder\u003c\/li\u003e\n\u003cli\u003eType 2 DC surge protective device (SPD), 500 V DC, with a PE (earth) terminal — must be bonded to ground\u003c\/li\u003e\n\u003cli\u003ePC engineering-plastic body, IP65 rated; MC4 connectors for the PV input, cable-gland entries for the DC output wiring, and an earth\/PE cable entry on the underside\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDisconnect all power sources before installation. This listing is for reference only: string sizing, wiring and grounding must be done by a licensed electrician to the NEC and your local code.\u003c\/p\u003e","brand":"ROCKSOLAR","offers":[{"title":"Default Title","offer_id":48459204002051,"sku":null,"price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/files\/1_topfront.jpg?v=1782148993"},{"product_id":"hoymiles-hms-c-combiner-box-with-monitoring","title":"Hoymiles HMS-C Combiner Box with Monitoring","description":"\u003cp\u003eCombine AC power distribution and system monitoring for compatible Hoymiles HMS series microinverters. The HMS-C integrates an Eaton BR load center, DTU-Plus communication module, power supply and smart meter.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e120\/240 VAC, 60 Hz system; 110 A rating and 88 A maximum continuous PV input.\u003c\/li\u003e\n\u003cli\u003e125 A busbar; supports up to five 2-pole Eaton BR solar branch breakers (sold separately).\u003c\/li\u003e\n\u003cli\u003eIncludes a 2-pole 10 A communication module breaker, pre-wired production CT and two consumption clamp CTs.\u003c\/li\u003e\n\u003cli\u003eEthernet and 4G LTE communication to S-Miles Cloud; RS485 Modbus support.\u003c\/li\u003e\n\u003cli\u003eProduction metering accuracy up to 0.5%; consumption metering up to 1.0%.\u003c\/li\u003e\n\u003cli\u003eOutdoor IP65 \/ NEMA Type 3R polycarbonate enclosure.\u003c\/li\u003e\n\u003cli\u003e500 × 400 × 200 mm; 9.6 kg; operating temperature −25°C to +50°C.\u003c\/li\u003e\n\u003cli\u003eManufacturer lists UL 1741 and CAN\/CSA C22.2 No. 107.1 compliance and a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCompatible with HMS series microinverters. Solar branch circuit breakers and Ethernet cable are not included. Conductor and breaker selection must follow local electrical requirements.\u003c\/p\u003e","brand":"Hoymiles","offers":[{"title":"Default Title","offer_id":49887800295683,"sku":null,"price":765.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/files\/upload-1792335762185.jpg?v=1792335764"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0494\/2577\/6801\/collections\/Solar_Kit_Accessories.webp?v=1694531262","url":"https:\/\/rocksolar.io\/collections\/solar-kit-accessories.oembed?page=2","provider":"ROCKSOLAR","version":"1.0","type":"link"}